How To Setup A Network Connection In Windows 7

Z7_3054ICK0KGTE30AQO5O3KA30N0

HP PCs - Creating a Wired Local Expanse Network (Windows 7)

This document pertains to HP and Compaq computers and workstations with Windows vii.

Windows 7 supports connectedness of multiple computers in a home network. Connecting multiple computers in a network tin exist a convenient way to share files in the home. This certificate provides instructions for setting upwards and sharing folders and files on a wired home network.

For more than information on a given step, click the heading or the accompanying plus (+) sign to expand the information.

Setting up a local network and file sharing in Windows 7

Utilise the steps in this department to ready a home network using standard RJ-45 hardware and cables.

note:
When using steps involving Windows, log in using the principal administrative account. Normally this is the kickoff account that was created when the figurer was first turned on.

Before you brainstorm setting up a local network in Windows seven

Confirm that you have the following hardware and follow these steps:

Network interface card (NIC) or an on-the-motherboard network port for each estimator. HP and Compaq computers are network fix with NICs installed. Ostend the computer has a RJ-45 network port on the dorsum.

Figure : Shape of RJ-45 connector
Network hub (or router). A dissever network hub may non be necessary if your home is already equipped with RJ-45 jacks in the walls or if your DSL or cable modem provides RJ-45 ports (select models). If you demand a network hub, consult with a network specialist at your local computer shop to determine a hub that meets your needs.

note:
A crossover cablevision can be used to connect ii computers without a hub. Even so, information technology only allows two computers to connect and is not expandable.
Network cables for each computer.
Disconnect the Internet. If you have a DSL or cable modem, disconnect information technology.
Disable any firewall software. Firewall software may interfere with network setup. You lot can enable the firewall later on network setup is complete.

Stride 1: Connecting the network hardware and cables to set up a local network

Do the post-obit to ready the network hardware and connect the networking cables.

Set up and plow on the ability for the network hub or other networking device. (Follow the instructions provided past the manufacturer).
Connect the computers to the networking device. If a crossover cable is used, connect the cable to the RJ45 network ports on each computer.

Figure : Example of one possible setup configuration
Connect the computer power cords and turn the computers on.

Step 2: Turning on Network discovery and file sharing in Windows 7

Turn on Network discovery and file sharing on each computer that you desire to access on the network. Follow these steps to begin setting up the network:

Click Start , and and so click Control Panel.
Under Network and Internet, click Choose Homegroup and sharing options.

Effigy : Network and Net
In the Homegroup settings window, click Alter avant-garde sharing settings.

Figure : Homegroup settings
Plow on network discovery and file and printer sharing. Review the other settings and turn them on or off.

Figure : Avant-garde sharing settings
Click Save changes.

Pace iii: Sharing drives, folders, and files in a Windows 7 network

To share non-public folders with other computers on a local network, follow these steps:

Click Start , and and so click Computer.
Browse to the folder you desire to share.
Right-click the folder, select Share with, so click Homegroup (Read), Homegroup (Read/Write), or Specific people.

Figure : Share with menu options
If you chose Specific people, the File Sharing window displays.
Click the down arrow and select the account you want to share with, then click Add.

note:
A User Account Command might open. You lot must accept this Window to make the necessary changes.

Effigy : File Sharing window
Click an arrow under Permission Level to gear up the permission level for each account or group.
Click Share.

Step four: Testing a local network in Windows 7

Open the Windows seven network window and browse through the shared folders in each computer on the network. If the computer is able to read and access files from a remote figurer, the remote computer is set up correctly. Browse to every available computer from each computer on the network. If there are whatsoever issues, become back through these steps and verify that the settings are correct.

When all computers are able to network to each other on the network, continue with the next step to enable Internet access and the firewall.

Stride 5: Enabling Internet access and firewall for a local network

In one case you have verified that your dwelling network is capable of transferring files, connect and enable Internet connections for computers with Internet access.

circumspection:
Make sure that each computer with Internet admission is well protected from security threats. At the minimum, each computer should have its Internet connection protected with a firewall and Windows should be updated with the latest critical updates from Microsoft Windows Update. If malicious activity comes though one computer, the action can apace spread through the entire network.

Accessing shared files and directories in Windows vii

Practice the following to access shared files and directories in a local network:

Click Showtime , click Control Panel, click Network and Internet, and then click Network and Sharing Centre.
Double-click Network.

Figure : Network and Sharing Center
The Network window opens and displays computers with shared folders that are detected on local networks.

Figure : Computers on the network with shared folders
Double-click the computer yous want to admission.

annotation:
When accessing shared files or directories the following error message window may display:

Figure : Cannot access PC

This error tin can exist acquired by the following:

Password Protection is On and the Guest business relationship is On.

The account does not accept permission to access the share. This typically occurs when specific permissions are set on systems with multiple share folders.

note:
Windows 7 file sharing displays all the shared folders, fifty-fifty those you practise non have permission to admission.

To resolve the error, verify the following:

The account has the proper permissions to access the computer.

The computer proper name and account name are spelled correctly.

Brand sure that Firewall software on whatsoever connected computer is set to permit access.